警察被两个混混脱裤玩j视频,再深点灬舒服灬太大了添gif,日韩欧美一区二区三区免费观看,豪妇荡乳1一5全集

歡迎進入深圳市漢斯福特科技有限公司網站!
13352927502
產品中心

Product Center

當前位置:首頁  -  產品中心  -  儀表  -  變送器  -  HS-660多通道稱重變送器
HS-660多通道稱重變送器
產品簡介

HS-660WeightTransmitterSuperpoweranti-interferencedesign,anytwo-pointcalibrationInput:4loadcellswith350OOutput:≤500ΩLinearity:≤0

產品型號:
更新時間:2024-06-26
廠商性質:代理商
訪問量:156
詳細介紹在線留言

HS-660

Weight Transmitter

Super power anti-interference design , any two-point calibration

0230301152238.jpg


  1. Input: 4 load cells with 350 O

  2. Output: ≤500Ω

  3. Linearity: ≤0.05%

  4. Output Ripple: ≤5mVp-p

  5. AD Sampling: 40SPS

  6. Total power Consumption:<0.2W(excluding load celland current load)

  7. Accuracy: ≤0.2%


Zero Adjustment

Power on and preheat for 10 minutes and then enter the calibration

Press and hold the "K1" key for more than 3 seconds, LED1 flashes 3 times from the original state and then goes out, indicating that it has entered the zero point calibration mode. Keep the weighing platform or sensor with no load or light load, and keep it stable. Use a multimeter to detect the output current. And use the buttons to adjust the output current:

1.Short press the "K1" key, LED1 flashes once, and the output current increases a little

2.Long press the "K1" button, LED1 flashes continuously, the output current continues toincrease, release the button to stop

3.Short press the "K2" button, LED2 will flash once, and the output current willdecrease a bit

4. Long press the "K2" key, LED2 flashes continuously, the output current continues to decrease, release the key to stop

5. Press "K1" and "K2" at the same time (short press) to exit the zero adjustment and save the current adjustment


Load Adjustment

Power on and preheat for 10 minutes and then enter the calibration

Press and hold the "K2" key for more than 3 seconds, LED2 flashes 3 times from the original state and then goes out, indicating

that it has entered the load calibration mode. Load the weighing platform or sensor with a load or weight and keep it stable.

Use a multimeter to check the output current , And use the buttons to adjust the output current:

1. Short press the "K1" key, LED1 flashes once, and the output current increases a little

2. Long press the "K1" button, LED1 flashes continuously, the output current continues to increase, release the button to stop

3. Short press the "K2" button, LED2 will flash once, and the output current will decrease a bit

4. Long press the "K2" key, LED2 flashes continuously, the output current continues to decrease, release the key to stop

5. Press "K1" and "K2" at the same time (short press) to adjust and exit, and save the current adjustment

Set Filter Coefficient

Press "K1" and "k2" at the same time for more than 3 seconds, LED1 and LED2 blink 3 times from the original state and then

go out, indicating that the filter coefficient setting mode has been entered, use the button to adjust the filter coefficient:

1. Short press the "K1" key, the filter coefficient will increase by 1 level, LED1 and LED2 will flash several times, which means the

current filter coefficient is in several levels

2. Short press the "K2" key, the filter coefficient will decrease by 1 level, LED1 and LED2 will flash several times, which means

the current filter coefficient is in several levels

3. Press "K1" and "K2" at the same time (short press) to exit and save the current settings

Reset

Press the "K1" and "k2" keys at the same time to turn on (power on the transmitter), LED1 and LED2 flash alternately, after

releasing the keys, the factory settings are restored and the normal working mode is entered.

Status Indication

LED1: Fast blinking indicates normal operation

LED2: bright means when the output current is greater than 20mA

LED3: bright to indicate that the power supply is working normally


HS-660

Weight Transmitter

Super power anti-interference design , any two-point calibration


QQ圖片20230301152238.jpg

在線留言

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯數字),如:三加四=7

TEL:0755-26552352

掃碼加微信

亚洲AV午夜福利精品一区| 大乳BOOBS巨大吃乳| 国产chinasex对白videos麻豆| 久久综合亚洲色HEZYO国产| A级毛片高清免费视频在线播放| 三个男人添一个女人下身| 无码人妻视频一区二区三区| 久久av| 久久久久亚洲AV无码专区桃色| 大白屁股缝里浓黑的毛| 推特app下载| 无码熟熟妇丰满人妻啪啪| xxxx日本| 国产A级毛片| 伊人久久综合精品无码AV| 学长惩罚我下面放震蛋上课| FREEXXXX性中囯HD性| 感受大海的时刻| 善良的嫂子在线观看| 亚洲国产精品毛片AV不卡在线| 精品久久久久久无码人妻中文| 久久久无码精品国产一区| 成人网站免费看黄a站视频| 国产女爽爽精品视频天美传媒| 无码精品人妻一区二区三区人妻斩 | 国产 字幕 制服 中文 在线| 88蜜桃人妻无码精品系列| 国产全黄三级| 白丝袜小舞被撕开裆部图片| 精品成品国色天香卡一卡二| 精品国产一区二区三区久久| 品酒要在成为夫妻后| 1314女人裸体a片| 国产看黄网站又黄又爽又色| 精品无码人妻一区二区免费av| 久久av无码乱码a片无码波多| 98国产精品综合一区二区三区| 久久久97精品国产一区蜜桃| 狠狠躁夜夜躁人人躁婷婷视频| 少妇人妻av| 局长含了一整晚我的奶头|