頻閃儀是指控制光源發光，以特定頻率快速閃動的光學測量?jī)x器

產品型號：

更新時間：2024-06-28

廠商性質：代理商

訪問量：243

產品咨詢 13352927502

詳細介紹在線留言

頻閃儀是指控制光源發光，以特定頻率快速閃動的光學測量?jī)x器。美國Checkline DT-311J頻閃儀本身可以發出短暫又頻密的閃光,當調節頻閃燈的閃動頻率,使其與被測物的轉動或運動速度接近或同步時,被測物雖然高速運動著,但看上去卻是緩慢運動或相對靜止,這種視覺暫留現象使人目測就能輕易觀測到高速運動物體的表面質量與運行狀況 ,而頻閃儀的閃光速度即為被檢測物體(例如:馬達 )轉速和運動頻率 (印刷袋 ) ,亦可以利用頻閃儀分析物體振動情況、高速移動物體的動作以及高速攝影等。利用頻閃儀觀測檢驗技術在歐美已廣泛使用 ,隨著我國經濟的高速發展,越來越多的行業開始使用頻閃儀來幫助解決產品質量檢驗問題。

Check-Line DT-311J 頻閃儀也叫頻閃靜像儀或轉速計 ,是能夠使作振動、高速旋轉或周期運動構件變成“ 靜止不動 " 構件的一種光學測量裝置。

Where powerful illumination and rugged speed measuring accuracy is required for the textile industry, the Check-Line DT-311J will perform where other stroboscopes will not. The Checkline DT-311J is used to set injection timing, injection pressure, timing of shedding and weft running time of weaving machinery. Units combine rugged NEMA 4X (IP65) housing with high performance accuracy, special phase shifting, with shock absorbing components and top mounted handle, allows the equipment operator maximum flexibility when setting the timing of weaving machinery.

LIMTED RANGE: 200-1,500 RPM/FPM
Accepts external trigger input and provides synchronizing pulse output
Water & Dustproof housing (IP65)
Phase shift for best view and flash photography
Hand-held or tripod operation
Easy-to-operate controls
Easy-to-read LED display

Flash Range	200-1,500 FPM
Internal Signal Range	200 to 1,500 FPM
Phase Shift	0° – 359° / 1° increments
Accuracy	±1 digit
Flash Rate/Phase Angle Setter	Rotary dial
Display	4 digit, 10mm high Red LED
Divide Ratio	1/1, 1/2, 1/3, 1/4, 2/4 with shift
Input Signal	High level: 5-24 V pulse Low Level: 0-1 V pulse. 2 msec minimum. Impedance less than 10k Ω
Input Impedance	47k
Display Mode	Phase shift (degree), Tachometer
Flashtube	Xenon lamp, max 10 W at 1,5000 rpm
Flashtube Life	1,200 hours at 1,500 rpm
Power Requirements	115 V or 230 V AC (specify), 50/60 Hz, 30 VA
Power Consumption	20VA max
Operating Temp	32 to 104 °F (0 to 40 °C)
Dimensions	149w x 174h x 214d mm
Weight	4.2 lb (1.9 Kg)
Warranty	2 years
Included Accessories	19.68’ (6m) input/power cable with connector, rubber strobe guard with handle